![background image](http://html1.mh-extra.com/html/raven/sc1/sc1_calibration-and-operation-manual_3868747031.webp)
Routine Implement Operation: Steering Status Screen
27
ROUTINE IMPLEMENT OPERATION
GPS STATUS INDICATOR
The following are common GPS status or mode information which may occur while the SC1/TC1 system is
engaged:
NOTE:
Both the steering wheel and GPS icons must be green in order to engage the SC1/TC1 system.
Select the satellite icon to display the GPS Status screen. Refer to the
GPS Status Screen
section on page 30 for
additional assistance with the information available on this screen.
STEERING STATUS SCREEN
Select the steering wheel icon to display the Steering Status screen. The Steering Status field displays the last exit
code and the reason why steering was disabled.
FIGURE 3. Steering Status Screen
Select the Steering Status History icon next to the Steering Status field to view the history including the times the
system disengaged and why it disengaged.
No GPS information is detected by the SC1/TC1 system.
GPS is not converged or GPS is converged and a warning DTC is present.
GPS is converged and no active DTCs are present.
GPS RTK-L solutions are being used for field guidance. DTCs may be present.
Summary of Contents for SC1
