Raven Envizio Pro, Installation And Operation Manual

Page: 74 / 287

6
P/N 016-0171-493 Rev. I 59
Basic Operation
AccuControl Setup
If an optional section control feature is available, touch the AccuControl button to create a new zone map or
load a previously created plant zone map for the job.
Note:
Refer to Chapter 9, Using AccuBoom™, for more information about using AccuBoom. For details
on using the AccuRow feature, refer to the AccuRow or OmniRow Calibration and Operation
manual.
The status for optional section control features may be displayed as follows:
•
Disabled - Feature is available or CANbus node is communicating, but optional features are not
enabled for this system.
•
Enabled - Feature is available or CANbus node is communicating and optional system features
are enabled.
•
Node Not Detected - The CANbus node is currently not detected by the field computer.
If selected, the name of the selected zone map will be displayed in the zones field.
Product Setup
To setup product nodes or control channels, select the corresponding Product button to setup the product
control for the selected node.
Note:
If the optional multi-product activation key is entered, up to four product nodes or control channels
may be displayed on the Verify Settings screen.