Chapter 6
66
Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Pivot
The pivot pattern is designed to provide guidance within
row crops with a center pivot, or circle, irrigation system.
To begin guidance using the pivot pattern, the operator
must set two points along the circumference of the field
or the swath furthest from the irrigation hub.
Set the first, or ‘A,’ point at the start of the swath furthest
from the irrigation hub and drive along the field
circumference and set the second, or ‘B,’ point at the
end of the swath. Using these two operator defined
points and the vehicle guidance width, the field computer
calculates circular paths stepping toward the center of
the field area.
As long as the Pivot pattern is active and the original
path is available, the field computer will display the
nearest circular path regardless of previous application history or coverage mapping. Currently, this pattern
does not require that the entire circumference of the field is driven before beginning guidance; however, better
results are achieved by driving further along the guidance line.
See the
section on page 73 for additional assistance when using the A-B guidance line tools
and features with the Pivot pattern.
Product Control Features
In addition to guidance features of the Envizio Pro, the Guidance screen displays product control information,
coverage maps, as well as vehicle and GPS information.
1.
Product Rate Display - This area displays the target and actual rates for each product enabled for the
current job. Touch the names area of the product rate display to toggle the selected product.
The Guidance screen displays area covered and volume indicators corresponding to the selected product.
Touch the target and actual rates area to access additional features and configuration settings while in a
job. See the
section on page 68 for more information on using this display.
Guidance Path
Vehicle Indicator
3
6
Previously
Applied Area
1
2
5
7
4
Summary of Contents for Envizio Pro
