Raven Envizio Pro, Installation And Operation Manual

Page: 241 / 287

Appendix H
226 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Blockage Monitor Status
During field operations, the field computer displays the status of each sensor loop at the bottom of the
Guidance screen.
The left half of the icon displays the status of sensor loop 1 while the right half of the icon displays the status of
sensor loop 2. The blockage status will display:
Green when the system is operating normally.
Yellow when a product blockage or dirty sensor is detected in the system. Check the indicated sensor
locations in the
Blocked display and clear any obstructions as necessary during operation.
Red if a communication issue is detected with the blockage sensors. Check sensor assemblies and
cables for disconnected or damaged parts and replace parts as necessary.
Touch the blockage status icon to access the Blockage Monitor Status screen.
At the top of the status screen, the sensor status for each implement section is displayed to assist the machine
operator locate and address equipment blockages. Touch the section selection drop down to display detailed
information for each sensor loop for the selected section.
Blocked. When a blockage is detected in loop 1 or loop 2, the sensor number(s) which detect an obstruction or
blockage will be displayed in this area. Check these sensor locations for obstructions in the line to clear the
blockage condition.
Note:
To help locate blockages during operation more quickly, it is recommended to number the sensors.
Refer to the seed blockage sensor installation instructions for details on numbering the sensors.
Dirty. Sensors may need to be cleaned periodically during seeding operations to ensure that the system is
accurately detecting the flow of seed or product through seed tubes. Check and clean the indicated
sensor(s) to ensure optimal system performance.
When monitoring particularly dirty seed types or products, it may be necessary to clean each sensor in the
loop when a the system indicates a sensor or sensors in the loop are dirty.
Section Blockage
Status Display
Section Selection
Blockage Monitor
Setup
Pause Blockage Status
Screen Updates
Communication Error
Information