Raven Envizio Pro, Installation And Operation Manual

Page: 186 / 287

9
P/N 016-0171-493 Rev. I 171
Using AccuBoom™
On-Screen Switch Box
If an optional automatic section control feature is enabled for the current job, the on-screen switch box icon will
be displayed in the lower, left corner of the Guidance screen.
Note:
The on-screen switch box is not available if a Raven CAN switch box or Switch Pro switch box is
connected to the CANbus.
Touch this icon to access the section control feature screen to control individual sections or activate the feature
override.
The AccuBoom screen displays the following icons to control sections:
Master Switch Control. Touch the master off, automatic or on icons to toggle all sections currently set to
automatic control. Tapping the master switch indicator will toggle any sections currently in the automatic mode
to the selected status. Tap the automatic mode will toggle those sections back to automatic while leaving any
manually controlled sections to the assigned mode.
Double tap the master switch icon to toggle all section switches to the selected status.
Section Control Switches. Touch the individual section control switches to toggle individual sections or rows
between the automatic, off or on.
AccuBoom Timed Override. Touch the timed override icon to override the AccuBoom feature on for the set
override time. Refer to the AccuBoom™ Setup section on page 164 for more information on calibrating the
AccuBoom feature and using the override.
Master
Switch
Section
Switches
AccuBoom
Override