Raven Envizio Pro, Installation And Operation Manual

Page: 129 / 287

Chapter 7
114 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Tank Fill Monitor
If an optional tank fill monitor system is installed with the field computer, the Tank Fill Monitor button will be
displayed on the Volume/Area Settings screen. Touch this button to access the tank fill system while refilling
the product tanks. Refer to Appendix G,
Tank Fill Monitor Calibration for addition information on using the Tank
Fill Monitor.
Field Volume and Area
The field volume and field area displays on the Volume/Area screen can be reset independently of the total
volume and total area displays. Reset the field volume and field area to keep a record of the volume of product
applied to a field and the acres applied in that field.
Total Volume and Area
The total volume and total area displays on the Volume/Area screen can be reset independently of the field
volume and field area displays. For example, reset the total volume and total area to keep records of the total
volume of product applied and the total acreage covered.
Feature Settings
From the Home screen, touch the Tools Menu icon and select the Product Control icon from the System menu.
Touch the Feature Settings icon to configure additional features settings on the field computer. The Feature
Settings screen may display the following options:
Zero Speed
The zero speed feature will automatically turn off product application if the vehicle speed drops below 0.7 mph
[1.1 km/h] while in automatic mode. To restart the system, cycle the master switch ‘Off’ then back ‘On.’ A speed
of 0.7 mph [1.1 km/h] must be maintained for more than 10 seconds or the zero speed feature will reactivate.