Raven Envizio Pro, Installation And Operation Manual

Page: 40 / 287

3
P/N 016-0171-493 Rev. I 25
Installation
Generation 2 Cabling
Connect the spade connector on the main interface cable (P/N 115-0172-001) labeled “Ext. Switch” (external
switch) to the machine master switch.
FIGURE 9.
Field Computer Cabin Cable (P/N 115-0172-001) Boom Sense Wire Connection
Note:
Revision A or B cabin cables may not provide the purple boom sense wire. Contact a local Raven
dealer for additional options or to replace the cable.
Contact the machine manufacturer for more information on connecting the boom sense wire on
the specific machine.
AccuBoom™
Refer to the machine specific installation materials for instructions on installing AccuBoom on the machine.
Note:
When used with a CAN product control system, AccuBoom requires a boom/speed node with
program D or newer for proper AccuBoom functionality.
AccuBoom™ Master Switch
The AccuBoom master switch option will allow AccuBoom to toggle coverage mapping and section information
as reported by the AccuBoom node.
To enable the AccuBoom master switch, connect the orange wire with white stripe on the AccuBoom node
harness to the machine master switch. Contact a local Raven dealer for more information on part numbers and
availability of the AccuBoom feature for the specific sprayer model.
Contact the machine manufacturer for more information on connecting this feature.
Boom Sense Wire
To Field Computer
To Chassis Cable