RANS S-20 RAVEN
TEXT MANUAL
09/01/2013
03D-03
19.
If after several seconds, there is no sign of oil pressure, stop cranking the
engine. Remove the Tank to Oil Cooler line at the tank. Using a funnel,
prime the oil line. Check to be sure Oil Cooler to Pump line is full. Re-
attach the line to the tank. Crank the engine. When an oil pressure
indication is achieved, stop cranking.
20.
Install the spark plugs and start the engine. Watch the oil pressure gauge
as the engine starts. After the engine starts, allow 10 seconds for oil
pressure to come up. If there is no pressure indication within 10 seconds,
shut the engine off and repeat the previous priming procedures. The
engine will change sound (quieter) as the oil starts pumping.
21.
After running the engine for a few minutes, check the oil level and check
for any leaks in the system.
