RANS S-20 RAVEN
TEXT MANUAL
09/01/2013
11C-01
CONTROLS
CABIN HEAT
1.
Check cabin heat valve is full “closed” with control knob in “OFF” position
and full “open” with control knob in “ON” position. Adjust at cable retaining
ferrule.
2.
Adjust the friction adjustment to provide enough friction on the cable to
keep it from moving unintentionally.
PARK BRAKE
3.
Check parking brake valve is full open (down) with control knob in “OFF”
position and full closed (up) with control knob in “ON” position.
NOTE: The
parking brake valve works as a “one-way” valve when “ON”.
If this is not
the case, adjust by loosening the swivel stop for adjustment at the control
arm.
4.
Adjust the friction adjustment to provide enough friction on the cable to
keep it from moving unintentionally. Refer to
FIGURE 11C-04
for location
of adjustment points.
THROTTLE
5.
Refer to Maintenance Manual for ROTAX
Engine Type 912 Series.
CHOKE
6.
Check choke lever is full closed (down) with control knob in “OFF” position
and full open (up) with control knob in “ON” position. If this is not the case,
adjust by loosening the cable stop for adjustment at the cable guide on the
carburetor.
