![background image](http://html1.mh-extra.com/html/rands/em510/em510_manual_3080638069.webp)
INITiate Subsystem
EM510
5.33
4065.7763.32-01.00
5.3.9 INITiate Subsystem
INITiate
.
[:IMMediate]
Start command to initiate measurement. Is also used as a start command for different SCAN types.
If
SENSe:FREQuency:MODE
is set on
CW|FIXed
a measurement is carried out with every
INITiate
command and the measurement result might be stored in
MTRACE
or
ITRACE
.
If
SENSe:FREQuency:MODE
is set on
SWEep|MSCan|PSCan
, the corresponding scan is started and
for each step a measurement is carried out.
If, for example, the path is set to the measurement value buffer
MTRACE
by means of the command
TRACE:FEED:CONTrol MTRACE, ALWays
then the measurement values are stored in
MTRACE
.
Parameters:
none
Example:
INITiate
.
:CONM
.
.
[:IMMediate]
Command to
CON
tinue a
M
easurement. Is also used as continue command for different SCAN types.
MTRACE
and
ITRACE
data sets are not deleted and are filled with measurement results according to
setting:
If
SENSe:FREQuency:MODE
is set to
CW|FIXed
, a measurement is carried out and possibly stored in
MTRACE
or
ITRACE
.
If
SENSe:FREQuency:MODE
is set to
SWEep|MSCan|PSCan
, a measurement is carried out for each
step and stored in
MTRACE
or
ITRACE
. As an alternative, the command
*TRG
or the interface message
Group Execute Trigger (
GET
) can be used. The response time is the shortest for a
GET,
which is why a
GET
should always be used for time-critical measurements.
Parameters:
none
Example:
INITiate:CONM
Summary of Contents for EM510
