R&S EM510, Manual

Page: 49 / 183

Remote Control via LAN EM510
5.13 4065.7763.32-01.00
5.3 Description of Commands
Note:
For an overview of commands see the tables in Annex K.
5.3.1 Notation
In the following sections, all commands implemented in the device are described in detail. The notation
corresponds to a large extent to that of the SCPI standards. The SCPI conformity information can be
taken from the list of commands in Annex K.
Indentations
The different levels of the SCPI command hierarchy are represented in the
description by means of indentations to the right. The lower the level, the
further the indentation to the right. Please observe that the complete
notation of the command always includes the higher levels as well.
Example:
SENSe:FREQuency:MODE
is indicated in the description as follows:
SENSe
first level
. :FREQuency
second level
. . :MODE
third level
Upper-/lower-case notation
Upper/lower-case letters serve to mark the long or short form of the
keywords of a command in the description (see next section). The device
itself does not distinguish between upper- and lower-case letters.