![background image](http://html1.mh-extra.com/html/rands/em510/em510_manual_3080638154.webp)
EM510
TRACe Subsystem
4065.7763.32-01.00
5.118
The following is valid for the IFPAN trace:
Output of the spectrum data. If there are no data available then a
NaN
(Not a Number) will be output.
The output format of the IFPAN trace depends on the settings made by command
FORMat:DATA
.
ASCii ->
normal ASCII output:
level in dB
V
PACKed -> <Definite Length Block>:
level in 1/10 dB
V (2 bytes)
The following is valid for the suppress trace:
List of frequencies contained in the trace. The suppress-trace output format is defined according to the
relevant setting through command
FORMat:DATA:
ASCii
->Normal ASCII output:
list of frequencies in Hz
PACKed
->
<Definite Length Block>
list of frequencies in Hz, 4 bytes per frequency
Example:
TRACE? SSTART -> 123475, 118000, 98550
Summary of Contents for EM510
