Rainbow Robotics RB Series, User Manual

Page: 133 / 440

RAINBOW ROBOTICS
RB SERIES _ USER MANUAL
© RAINBOW ROBOTICS Inc. All rights reserved.
133
[Step 7]
After the program is finished, run it on the work screen by pressing the “Play” ( ▷ )
button. To run the movements using the simulation arm, use the Simulation mode.
To run the movements using the real robot arm, use Real Robot mode.
After clicking the “Play” button ( ▷ ), the robot will move to its initial position as
shown below.
By holding down the “Approach” button, the robot arm will move to the initial
position for the program. Once the robot reaches its starting position, a pop-up
message will confirm to the user that the robot has reached its starting position.