PROGRAMMING
4-31
4.7.6
Change Date
The MiniRAE 2000 monitor is equipped with a real time clock
(RTC). The user can enter the correct date and time (see 4.7.7)
for the real time clock.
1.
“Change Date?” is the sixth sub-menu item in the Monitor
Setup menu.
2.
Press
[Y/+]
and the display shows the current date “mm /
dd / yy” with the left most digit of the date flashing.
5.
To modify this value, use the
[Y/+]
or
[N/-]
key to change
the digit value and press the
[MODE]
key momentarily to
advance to the next digit. The flashing digit will move on to
next digit to its right. Repeat this process until the new date
and time values are entered. Press and hold the
[MODE]
key for 1 second to exit data entry mode.
4.
If there is any change to the existing value, the display
shows “Save?” Press
[Y/+]
to confirm the new value or
press
[N/-]
or
[MODE]
to discard the changes and move to
the next sub-menu.
Summary of Contents for MiniRAE 2000 PGM-7600
Page 93: ......
