OPERATION
2-11
•
T = xxxF:
The internal unit temperature in degrees
Fahrenheit. (see Section 4.7.13 to change temperature units)
•
Log on/Off?:
Allows the user to start datalogging of the
current measurement. A superscript “L” flashes in the ppm
measurement display when datalogging is on. This screen is
not shown when datalogging is disabled or when the
monitor is not operating in manual start/stop mode.
•
PC Comm?:
This function enables the user to upload data
from the MiniRAE 2000 to a Personal Computer (PC) or
send/receive configuration information between a PC and
the MiniRAE 2000. Press
[MODE]
to return to
Ready…
.
To communicate with a PC, connect the monitor to the
serial port of a PC and start the MiniRAE 2000 application
software. Press the
[Y/+]
button and the LCD displays
“pause monitor, ok?”
Press the
[Y/+]
button one more
time, and the display shows
“Comm...”
The monitor is
now ready to receive commands from the PC.
•
Survey:
This function displays the Current Operating Mode
(
Survey
or
Hygiene
).
Taking a Measurement
There are two ways to start a measurement.
1.
Operating in Hygiene mode.
2.
Manually start and stop measurement in Survey mode.
To start a measurement in Hygiene mode, please refer to
Section 4.7.1, “
Change Operation Mode
”. To start a
measurement in Survey Mode, the MiniRAE 2000 monitor
must first be in the “Ready…” mode. This is the mode to which
the monitor normally powers up.
Summary of Contents for MiniRAE 2000 PGM-7600
Page 93: ......
