PROGRAMMING
4-14
4.4.6
Change Correction Factor
This function allows the user to change the Correction Factor of
the standard calibration gas (only for Cal Memory #0).
1. “Change Correction Factor?” is the sixth sub-menu in the
Calibration sub-menu.
2. Press
[Y/+]
key. Display shows the gas name, then the
correction factor.
A cursor blinks at the left-most digit of the correction factor.
If user wants to modify the correction factor, go to Step 3.
Otherwise, press and hold the
[MODE]
key for 1 second to
accept the previously stored correction factor value and
return to the first sub-menu of the calibrate/select gas menu.
3.
Starting from the left-most digit of the correction factor, use
[Y/+]
or
[N/-]
key to change the digit value and press
[MODE]
key momentarily to advance to the next digit, the
cursor will move to the next digit to the right. Repeat this
process until all digits are entered. Press and hold the
[MODE]
for 1 second to exit.
4.
The display shows “Save?” To confirm the new value,
press
[Y/+]
to accept the change. Press
[N/-]
or
[MODE]
to
discard the change and return to the first sub-menu,
Calibrate and Select Gas.
Summary of Contents for MiniRAE 2000 PGM-7600
Page 93: ......
