PROGRAMMING
4-17
4.5.1
Change Low Alarm Limit
The second sub-menu item in the Alarm Limit sub-menu allows
the user to change the Low Alarm limit. The LCD displays
“Low limit?” To change Low Alarm limit, press
[Y/+]
key, or
Press
[N/-]
key advance to next sub-menu in Table 4.5.
1.
Press
[Y/+]
and the display will show a flashing cursor on
the left-most digit of the previously stored Low alarm limit.
2.
To modify this limit value, use the
[Y/+]
or
[N/-]
key to
change the digit value and press the
[MODE]
key
momentarily to advance to the next digit. The flashing digit
will move to the next digit to its right. Repeat this process
until the new limit values is entered. Press and hold the
[MODE]
key for 1 second to exit data entry mode.
3.
If there is any change to the existing value, the display
shows “Save?” Press
[Y/+]
to accept the new value and
move to the next sub-menu. Press
[N/-]
to discard the
changes and move to the next sub-menu.
Summary of Contents for MiniRAE 2000 PGM-7600
Page 93: ......
