PROGRAMMING
4-16
2.
Press the
[Y/+]
key to select the desired limit and the
display shows a flashing cursor on the left-most digit of the
previously stored alarm limit.
0010.0
3.
To modify this limit value, use the
[Y/+]
or
[N/-]
key to
change the digit value and press the
[MODE]
key
momentarily to advance to the next digit. The flashing digit
will move to the next digit to its right. Repeat this process
until the new limit value is entered. Press and hold the
[MODE]
key for 1 second to exit data entry mode.
4.
If there is any change to the existing value, the display
shows “Save?” Press
[Y/+]
to accept the new value and
move to the next sub-menu. Press
[N/-]
to discard the
changes and move to the next sub-menu.
Summary of Contents for MiniRAE 2000 PGM-7600
Page 93: ......
