DESIGN AND OPERATION SPECIFICATIONS
The G2X was created to provide an economical and easy method to obtain data that was previously
available only when utilizing a standard sensor and wire data system. The combination of the G2X and
Display Dash is designed to be an intuitive package, which provides data according to the action of the
vehicle.
Why GPS?
The use of GPS signals provides track mapping, lap times, segments times and MPH. This eliminates
the need for tripods, multiple trackside transmitters, onboard beacon receiver and wheel speed sensors.
All those items are replaced by simply installing the GPS antenna on the roof of the vehicle.
G2X Data Logger
•
Compact Flash memory provides over 30 hours of GPS data logging when used with a 128MB
card.
•
Memory card capable of storing single or multiple runs, which are date and time stamped.
•
Logging automatically starts when vehicle exceeds 25 MPH.
•
Logging stops when vehicle is stationary for greater than 30 seconds.
Display Dash
•
Provides ability to set start / finish line at any point on the track.
•
Provides lap number and time data.
•
Provides vehicle data such as MPH, Engine RPM, voltage and 2 axis accelerometer.
•
Vehicle information automatically is displayed when vehicle is moving.
•
Lap time and number is automatically displayed each time the start / finish line are crossed and
when the vehicle comes to a stop.
DataLink Software
1.
Provides ability to create GPS track map with start / finish and segment times.
2.
GPS maps can be saved and utilized any time the vehicle returns to the same track location.
3.
GPS maps provide lap and segment times that can be compared to previous data recordings.
4.
Provides information in both graphical and report format.
5.
Allows overlaying of multiple laps.
2
