Progressive Shift Light RPM Step
The progressive shift light enables the user to program the green, yellow and red LED’s to display in a
sequential pattern, using the Shift Point as defined in the next section as the final display. The
progressive shift light turns on the LED's in steps of 1 to 500 rpm according to the programming.
Example
: A shift light RPM programmed for 7400 RPM, with a 100 RPM step would display in this
manner:
>7000 RPM = First two green LED’s are displayed
>7100 RPM = All four green LED’s are displayed
>7200 RPM = All four green and first two yellow LED’s are displayed
>7300 RPM = All four green and all four yellow LED’s are displayed
>7400 RPM = All LED’s are displayed
2)
Increase RPM by 10: Short right press - Returns from 500 to 0
3)
Decrease RPM by 10: Medium right press - Returns from 0 to 500
4)
3. Increase RPM by 50: Long right press - Returns at 500
5)
Auto increase RPM by 50 every .2 seconds: Hold key - Returns at 500
Short left press
: Accept selection and go to next setup parameter
Long left press
: Save programming and Exit Setup
17
