GMT Hour Offset
The date and time stamp placed on the data files is derived from the GPS satellite data, which is received
in Greenwich Mean Time (GMT). This setting allows you program the G2X with an offset of how
many hours your current time is from GMT time. The factory default setting is –05 hours which is
Eastern Standard Time (EST).
5)
Increase hour count by 1: Short right key press - At 12 returns to –12
6)
Move to next programming item: Short left key press
Short left press
: Accept selection and go to next setup parameter
Long left press
: Save programming and Exit Setup
Units of Measure
Programs the G2X dash to display speed in MPH or KPH. After changing this setting you should also
reprogram the wheel speed calibration in SETUP Mode 2 if you are using the wheel speed sensor input
to display speed. Changing the Units of Measure setting only affects the data displayed on the dash.
The GPS_MPH data will always be recorded in MPH. If you recalibrate the wheel speed sensor the
recorded MPH will then be in the newly selected units. Selecting Y for this setting will select MPH.
Selecting n for this setting will select KPH.
7)
Switch between Y an n: Short right key press
Short left press
: Accept selection and go to next setup parameter
Long left press
: Save programming and Exit Setup
20