Display Dash Modes
The Display Dash provides information and programming capabilities in the following modes:
1.
Real-time Mode:
1.
Provides real-time vehicle information such as lap time and speed to the driver.
2.
The display will automatically enter this mode anytime the engine is above 300 RPM or the
vehicle speed is above 5 MPH.
2.
Replay Lap Mode
:
a)
Provides lap time and lap number information from previous laps.
b)
The display will automatically enter this mode anytime the engine is below 300 RPM and the
vehicle speed has been below 25 MPH for 30 seconds or longer.
c)
The G2X must be turned off and back on again to reset the display back to lap 0.
3.
Setup Mode
–
Allows for setup and programming of the dash and G2X data logger.
Note: If the units in SETUP Mode 1 has been programmed for KPH then vehicle speeds
describes above are 5 KPH and 25 KPH respectively.
What this means to the driver is the ability to view standard dash functions, such as speed and
tachometer, at the most logical time, when the motor is running and the vehicle in motion (
Real-time
Mode
). When the driver stops the vehicle and turns off the engine, the dash automatically returns to
Lap Number and Lap time display (
Replay Lap Mode
) at which time the driver can review the most
recent lap times. To reset back to lap 0, turn the G2X power off and back on.
30