Step 2: Select Track Type
For open course, select Open Course.
Step 3: Set Lap Start / Set Lap End (Open Course Only)
As discussed in the previous section, the current data in view represents the GPS position of the vehicle
from the start until the end of recording. If you were to place the mouse cursor in the Main Graph area,
(insure GPS_MPH is still graphed and the entire run is in view) then left click and drag the mouse curser
through the Main Graph area, you can follow the location of the vehicle in the GPS driving line data.
To Set Lap Start, place the mouse cursor in the Main Graph area, left click and move the
vehicle location (as noted by the small X) in the GPS map data until the approximate start area
is located. Next, select the Set Lap Start button. Then, move the curser to the desire end of the course
and select the Set Lap End button.
Step 4: Create GPS Track Map
Finally, select the
CREATE GPS TRACK MAP
button. This action now completes the GPS track
mapping process.
55
