Setup Mode # 2
Setup Mode 2 functions allows the user to utilize inputs from the moving vehicle, in order to automate
the programming process. Setup Mode 2 presents the programming choices in the following order:
1)
Running Engine RPM Pulse Count
2)
Rpm 2 Input For Speed
3)
Gear Indicator Using Engine RPM and MPH
4)
Installation Direction of the Accelerometers
Setup Mode 2 can be entered either from the Normal or the Lap Replay Display modes.
To enter Setup Mode 2:
1)
Press and hold the right key button to send a medium key press (two flashes and release)
2)
The following message will be displayed:
3)
To confirm you wish to enter Setup Mode 2, press and release the right button to send a short key
press.
A long right press is required following the setup of each of the four above parameters. This long right
press also advances the user to the next programming input screen. The Setup 2 Mode may be exited at
any time with a long left key press.
NOTE: SETUP Mode 2 programming requires the vehicle to be in motion. Care should be
taken when driving the vehicle to insure safe operation. If possible, take a passenger along
to operate the Display Dash and perform the calibration procedures.
22
