Software Installation
NOTE: Before installation, remove any DataLink software that is on your PC. Typically, the
software was installed for the Demo CD that was received by some customers.
Removal should be performed utilizing the Uninstall feature of Windows. We also recommend
renaming or deleting the C:\RacePakData\ folder installed by the original software. This folder
contains out of date files that are used by the new G2X Demo software. Some of these files cannot
be deleted automatically and may interfere with the operation of the G2X.
To install the RacePak DataLink software on your computer, perform the following.
1. Turn on the computer and start Windows.
2. Insert the CD labeled RacePak DataLink Software into the CD drive.
3. The RacePak DataLink Setup program will automatically start, and the setup Install
Shield Wizard will be displayed. Please note—If you have disabled auto run in your
computer the installation wizard will not automatically start. To manually start the
installation program; Select
My Computer
from the computer desk top, select the
CD
drive
by clicking on it and double click on
Setup
to start the installation program.
4. Read the instructions on the dialog boxes and answer any questions required.
We recommend you install the software in the default directories as indicated during the installation
procedure. This will make it easier for our technicians to assist you at a later date should you have an
application problem. If you install the software in a directory other than the default directory, please
note the install directory, in order to assist our technicians should a problem arise.
The Install Wizard will automatically create a shortcut on
the main desktop for the RacePak
DataLink program.
Compact Flash Card Reader Installation
Data recorded by the G2X data logger system is stored on a standard Compact Flash memory card. In
order to transfer the data to the users PC, it is necessary to utilize a Compact Flash card reader. Many
modern PC’s have built-in readers as compact flash cards are used extensively in digital cameras and
other electronics devices. If your PC does not have a reader you will need to purchase and install a
Compact Flash card reader. USB card readers are available at most electronics stores for a minimal cost.
Carefully follow the installation instructions provide by the card reader manufacturer.
36
