Racal Instruments 3162A/B, User Manual

Page: 36 / 144

User Manual 3162A/B
Using The Instrument 3-2
Protection
the level of protection associated with each input or output connector.
Power On/Reset
Defaults
At Power On or as a result of a software reset, the Model 3162B defaults to the
conditions shown in Table 3-1. Also listed in this table are parameters that are
common or separate for each channel. A complete list of all parameters, their
default values, as well as their maximum and minimum values is given in
Chapter 4.
Use the following command to place the instrument in its default state:
RESet;
Using the IEEE-STD-488.2 common command *RST will have the same result
.
Function / Parameter Default Inter-Channel
Dependency
Output State: Off Separate
Operating Mode: Continuous Common
SYNC State: Off Common
SYNC Out Position: Wave Start Common
Output Function: Standard Separate
Output Function Shape: Sine Separate
Standard Wave Frequency: 1MHz Common
User Wave Sample Clock: 1MHz Common
Amplitude: 2V Separate
Offset: 0V Separate
Filter State: Off Separate
Filter Type: Auto Separate
ECLTRG0: Off Common
TTLTRG0-3: Off Common
Table 3-1, Default Conditions After Power On or After *RST