Quickie R-net, Instructions For Use Manual

Page: 55 / 108

Fig.1 6. 1
Fig.1 6. 2
1 6. 5 IR Set-Up
A right SID deflection will enter a sub-menu for learning and
deleting IR codes. See page 56.
Refer to your healthcare professional or authorized dealer.
16. 6 Programming (Fig 16.1)
A right SID deflection will enter a sub-menu for programming
with access to two further sub-menus, Controls and System.
16. 6.1 Controls (Fig 16.2)
A right SID deflection will enter a sub-menu for programming
user experience functions as follows:
Profiled Controls>Sleep:
Sets the time after which the control system will go to sleep if
a SID command is not received, in the selected profile.
Sounder Volume:
Sets the volume of the sounder used to indicate button
presses.
Horn Volume:
Sets the volume of the horn when used.
Start-Up Beep:
Sets whether a short beep occurs when the Omni2 is turned
on.
Momentary Screens:
Sets whether programmed Momentary Screens are displayed.
Display Speed:
Sets how the powerchair’s speed is displayed; options are
mph, km/h or off.
Displays:
Sets the format of the digital drive display; options are
odometer, speed or both.
16. 6. 2 System (Fig 16.3)
A right SID deflection will enter a sub-menu displaying System
information.
16.6.2.1 Diagnostics (Fig 16.4)
A right SID deflection will enter a sub-menu displaying System
information. Allows the user to read diagnostic information
from the control system.
16.6.2.2 Diagnostics Timers
A right SID deflection will enter a sub-menu displaying System
information. Allows the user to read diagnostic information
from the control system.
16.7 Exit
A right SID deflection will exit the Settings Menu and return to
the User Menu.
Fig.1 6. 3
Fig.1 6. 4
249044 Rev. A 55 R-Net Control System w/Omni2