Fig.
1
8
.0
1
8
.0
Pairing
with a Bluetooth Device
(Fig 1
8
.0)
The Omni2 must first be put into Discovery Mode via the
sequence below.
- Enter Bluetooth Mode and select the device you wish to
pair with.
- Deflect the SID in the forward direction and hold until
there is a beep. This will take approximately 10 seconds,
then release.
- Deflect the SID in the reverse direction and hold until
there is a beep. This will take approximately 10 seconds,
then release.
A screen such as shown in Fig 18.0 will appear – the
flashing blue icon confirming the Omni2 is in Discovery
Mode.
Depending on which type of device is being paired with – a
Windows PC, an Android device or an iDevice – refer to one
of the following three sections.
1
8
.
1
Pairing with a Windows PC
(Fig 1
8
.1
to
18.
4
)
If the PC does not have integrated Bluetooth, then a receiver
dongle must be used and its drivers installed. Curtiss-Wright
recommends use of the following Bluetooth dongles:
- Trust BT-2400
- Linksys USBBT100-UK
- Belkin F8T012uk1 Version 1000
Once a Bluetooth connection is confirmed, the following
process should be undertaken on the PC (based on
Windows 10):
From the Start menu, select Settings, then Devices. A screen
such as shown in Fig 18.1 should appear.
Click on the ‘+ Add Bluetooth or other device’ section in the
‘Bluetooth & other devices’ menu and then select ‘Bluetooth’.
Fig 18.2.
The PC will now search for local Bluetooth devices.
Select the name of the device to be paired, in this example,
‘Tom’s PC’, Fig 18.3.
The PC will now attempt to connect. (If a passkey is requested
use 1234). After a short time, a screen such as shown in Fig
18.4 should appear.
The blue icon on the Omni2 should have stopped flashing.
If the process fails, click on ‘Tom’s PC’, then ‘Disconnect’ and
repeat the process.
Fig.1
8
.1
Fig.1
8
.
2
Fig.
1
8
.
3
Fig.
1
8
.
4
249044 Rev. A
60
R-Net Control System w/Omni2
Summary of Contents for R-net
