15.
6
Seating Mode Screen
(Fig 15.
23
)
Displays symbols relevant to the seating control of the
wheelchair.
Displays the sections of the chair currently selected for
movement, the axis number, the name given to the selection
and a direction arrow showing what sort of movement is
available.
Typical seating adjustment is achieved as follows.
- Move the SID left or right to select the desired axis.
- Move the SID forwards or backwards to move the seat.
15.6.1 Latched Seating Control
(Fig 15.
24)
This symbol will be displayed if the control system is set for
latched seating control operation.
15.6.2 Scanner Actuator Symbols
(Fig 15.
25
)
If the Omni2 is programmed to operate with a Single Switch
Scanner Type SID these symbols will be displayed to
indicate (see Fig 25).
15.6.3 Bluetooth Mode Screens
The initial Bluetooth Mode screen will be dependent on
whether the Omni2 has been set-up to control one or more
devices.
If set-up to control just one device, screen Fig 15.26 will
appear.
If set-up to control more than one device, screen Fig 15.27
will appear.
The SID should then be used to navigate the menu and
select the device to control. Forward and reverse deflections
navigate the menu, while a right deflection selects the
highlighted device.
Refer to your healthcare professional or authorized dealer.
Fig.15.
24
Fig.15.
23
Up.
Down.
Exit Actuators.
Fig.15.
2
5
Fig.15.
2
6
Fig.15.
2
7
249044 Rev. A
51
R-Net Control System w/Omni2
Summary of Contents for R-net
