14.5 Operation with Switch Type SIDs
(Fig 13.3)
Driving is via the SID’s Forward, Reverse, Left and Right
switches, and the fifth switch or User Switch is used to
enter the User Menu
or to sequence through the other
functions of the wheelchair.
There are several standard R-net programing features
that may be useful when using this SID type. These
include joystick orientation. Refer to your healthcare
professional or authorized dealer.
Standard control of seating movement is via Forward
and Reverse buttons, and Left and Right buttons will
select a different seat axis for movement.
Please refer to Section 14.6
If required, it is possible to re-program the Omni
2
to
control the seating movement in alternative ways. Refer
to your healthcare professional or authorized dealer.
For latched operation using this SID type, refer to section
Latched Operation.
14.4 Operation with Joystick Type SIDs (Fig 1
3
.2)
Driving is via the SID’s joystick and the User Switch is
used to enter the User Menu or to sequence through the
other functions of the wheelchair.
There are several standard R-Net programming features
that may be useful when using this SID type. These
include joystick throw, joystick orientation and joystick
deadband. Refer to your healthcare professional or
authorized dealer.
Standard control of seating movement is via Forward and
Reverse commands, and Left and Right commands will
select a different seat axis for movement.
Please refer to Section 14.6.
If required, it is possible to re-program the Omni
2
to
control the seating movement in alternative ways. Refer to
your healthcare professional or authorized dealer.
For latched operation using this SID type, refer to section
Latched Operation.
Fig.14.2
Drive*
>
Will enter Drive Mode in the presently selected Profile
x: Profile x**
>
Will enter Drive Mode in the indicated Profile
Profile
<x>
Sets the Profile that is used the next time Drive Mode is entered
Seating*
>
Will enter Seating Mode
Seating* 2
>
Will enter a second Seating Profile, e.g. if non-latched and latched operation is required
Seating*
<x>
Sets the Seating Profile that is used the next time Seating Mode is entered
Speed Adjust
<x>
Adjusts the maximum speed setting
Mode x* To Mode y*
>
All other available system Modes, e.g. Mouse 1 , IR Mode etc.
Sleep
>
Will put the Omni2 to sleep
Lights
>
Will enter Lighting Control Mode
Exit
>
Will exit the menu and enter Drive Mode in the presently selected Profile
Settings
>
Allows access to user settings such as backlight and clock adjustment
* The text will reflect the setting of the standard R-net parameter Mode Name.
** The text will reflect the setting of the standard R-net parameter Profile Name.
249044 Rev. A
42
R-Net Control System w/Omni2
Summary of Contents for R-net
