manualshive.com logo in svg

Quickie R-net, Instructions For Use Manual

Share
Download
Quickie R-net Instructions For Use Manual Download Page 47

14.10 Lighting Control Mode

While in Lighting Control Mode, a screen as in Fig 14.7 will 

appear. Forward and Reverse SID commands will select each 

lighting function. A Left or Right SID command will switch on 

the function. Another Left or Right SID command will switch 

the function off. 

An operation of the User Switch or a Right SID command 

while Exit is highlighted exits to the point set by the parameter, 

Return To.

Refer to your healthcare professional or authorized dealer. 

If User Control is set to Sequence, then selecting the Exit 

option will sequence to the next available menu entry. 

14.11 Latched Operation

The latched operation parameters are now contained within 

the standard R-net programming, rather than in the Omni2. 

Within the standard R-net programming, the relevant 

parameters are: Latched Drive, Latched Actuators, Latched 

Timeout and Latched Timeout Beep.

 Please refer to your healthcare professional or authorized 

dealer.

Fig.14.

7

249044 Rev. A

47

R-Net Control System w/Omni2

Summary of Contents for R-net













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands