manualshive.com logo in svg

Quickie R-net, Instructions For Use Manual

Share
Download
Quickie R-net Instructions For Use Manual Download Page 69

1

9

.5  

Connectors

 

1

9

.

6

 Servicing

To ensure continued satisfactory service, we suggest you have 

your wheelchair and control system inspected by your authorized 

dealer after a period of 1 year from commencement of service. 

Contact your authorized dealer for details when the inspection is 
due. 

CONTACT PHONE NUMBERS

•

Make sure that all connectors are securely mated.

•

Check the condition of all cables and connectors for damage.

•

Check the thin rubber gaiter or boot, around the base of the

joystick shaft, for damage or splitting.

•

Check visually only, do not handle the gaiter.

•

Check that the buttons are not contaminated with food or drink,

or damaged in any way.

•

Make sure that all the components of the control system are

securely mounted. Do not overtighten any securing screws.

249044 Rev. A

69

R-Net Control System w/Omni2

Summary of Contents for R-net













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands