15.0
Omni2
LCD Screen
15.1 LCD Screen Details
(Fig 15.0)
Some of the information in this section will have been covered
earlier, however, the following provides a complete description
of all the LCD screen graphics.
The screen is split into four areas of information: Battery
Indicator, Information Bar, Main Area and Text Bar. Each area
is detailed separately in the following sections.
15.2
Battery Indicator (Fig 15.1)
This displays the charge available in the battery and can be
used to alert the user to the status of the battery.
Steady:
This indicates that all is well.
Flashing Slowly:
The control system is functioning correctly,
but you should charge the battery as soon as possible.
Stepping Up:
The wheelchair batteries are being charged.
You will not be able to drive the wheelchair until the charger is
disconnected and you have switched the control system off
and on again.
15.3
Information Bar
(Fig 15.
0
)
This area contains information and warning symbols, as well
as a clock.
15.
3.1
Focus
(Fig 15.2)
When the control system contains more than one method of
direct control, such as a secondary SID, Joystick Module, or a
Dual Attendant Module, then the Module that has control of the
wheelchair will display the Focus symbol.
15.
3.2
Bluetooth Signal
Icon (Fig 15.3)
This symbol appears when Bluetooth is enabled. If the symbol
is white, the system is not paired to an external Bluetooth
device. If the symbol is blue, the system is paired to an
external Bluetooth device. When the system has been placed
into Discovery Mode, the icon will flash blue.
15.
3.3
Motor Temperature
(Fig 15.4)
This symbol is displayed when the control system has
intentionally reduced the power to the motors, in order to
protect them against heat damage.
15.3.4
Control System Temperature
(Fig 15.5)
This symbol is displayed when the control system has
intentionally reduced its own power, in order to protect itself
against heat damage.
15.3.5
Clock
(Fig 15.6)
This displays the current time in a numeric format. The clock is
user adjustable.
Adjustable options are:
- The time, the user can adjust the time.
- Visibility, whether the clock is displayed on screen.
- The display format, 12 or 24 hour.
These adjustments are made within the Settings Menu. Refer
to the Settings Menu section for further details.
Fig.15.0
Fig.15.
1
Fig.15.
2
Fig.15.
3
Fig.15.
4
Fig.15.
5
Fig.15.
6
249044 Rev. A
48
R-Net Control System w/Omni2
Summary of Contents for R-net
