Chapter 3 DX-Series Remote Management
Configuration
Quantum DX-Series User’s Guide
58
Table 11 Port Settings
4
To map specific devices to Fibre Channel ports, click
Device Mapping
.
The
Device Mapping
page displays (see
figure 38
).
Figure 38 Device Mapping
Configuration
Field
Description
Node World
Wide Name
(WWN)
The node WWN is the overall system
identification on the customer SAN. This field
allows you to set the WWN in case a controller
is replaced so the customer SAN will not
require remapping.
AL_PA and
Loop ID
This field allows you to set either a soft or hard
AL_PA. Soft allows the customer SAN to
automatically assign a loop ID to the DX-Series
System. Hard allows you to manually assign
the loop ID. The Default setting is soft.
Speed
This field allows you to select the maximum
link speed of the Fibre Channel port (1GB/sec,
2GB/sec, or Automatic). The default setting is
Automatic.
