Chapter 4 Troubleshooting
Host Bus Adapter Settings
Quantum DX-Series User’s Guide
104
•
JNI™ Fibre Channel HBA
•
Emulex™ Fibre Channel HBA
•
Q-Logic™ Fibre Channel HBA
JNI™ Fibre Channel HBA
4
For the DX-Series system to communicate with the JNI Fibre Channel
HBA, the card must be setup correctly. JNI is configured through
EZ-Fibre. Ensure that the drive mapped check boxes for the DX-Series
system items are selected in the LUN-Level Zoning tab as shown in
figure 68
.
Figure 68 JNI Fibre Channel
HBA Configuration
Must be
checked
Emulex™ Fibre Channel
HBA
4
For the DX-Series system to communicate with the Emulex Fibre Channel
HBA, the card must be setup correctly. Emulex Fibre Channel HBAs are
configured through the Lightpulse Utility. Ensure that the Automap
function is enabled as shown in
figure 69
.
