Chapter 4 Troubleshooting
Host Bus Adapter Settings
Quantum DX-Series User’s Guide
103
Host Bus Adapter Settings
4
This section provides additional information on setting up your specific
Fibre Channel HBA (Host Bus Adapter).
The following HBAs have specific configuration information that must be
set properly to function with the DX-Series system. Refer to your specific
HBA documentation for additional information.
Windows cannot see
the robot or tape
drives with Emulex
Fibre Channel HBA.
See
Host Bus Adapter Settings
for HBA
information.
Tech Tip:
If your Fibre Channel HBA supports bus resets, this
feature must be disabled to operate with the DX-Series
controller. Fibre Channel HBAs only support bus resets.
Problem
Corrective Action
