Appendix B Setup CD and Setup Menu
Reinstalling the Controller Operating System
Quantum DX-Series User’s Guide
116
1
Connect a 9-pin RS-232 null modem cable to the COM port in the left-
most PCI slot the back of the DX-Series controller and to a serial port
on a local host system (see
figure 74
).
Figure 74 Connecting the
Service PC to the Controller
Serial port
DX30 shown
2
Open a terminal emulation program on your host system and set the
following properties:
• Baud rate
115200
• Data bits
8
• Parity
none
• Stop bits
1
• Flow control
none
• Emulation
ANSI
Installing System
Firmware
2
To install the system firmware (Linux operating system):
1
Insert the setup CD in the controller CD-ROM drive.
2
Reboot the controller by pressing the reset button on the front of the
controller.
