Chapter 3 DX-Series Remote Management
Configuration
Quantum DX-Series User’s Guide
57
Figure 37 Fibre Channel
Configuration
2
While the Port WWNs are always unique, the Node WWNs can be set
according to the
Make the Node WWN
section as follows:
a
Selecting
Globally Unique but same for all ports
makes the Node
WWNs the same for all Fibre Channel ports.
b
Selecting
Equal to the Port WWNs for each port
makes the Node
WWNs equal to the Port WWNs.
3
Selecting The
Port Settings
page (see
table 11
for field descriptions)
allows you to set the AL_PA, Loop ID and link speed for each Fibre
Channel port connecting the DX-Series system to the customer SAN
(DX30 has two ports and DX100 has eight ports).
Note:
The DX-Series system must be off-line to configure the
Fibre Channel options.
