Appendix B Setup CD and Setup Menu
DX-Series Setup Menu
Quantum DX-Series User’s Guide
120
• System IP Address
• Network Mask
• Network Gateway IP Address
• Network Domain Name
• Network DNS IP Address
• Network Link Speed and Duplex Mode
The system displays the information and asks for confirmation.
4
If the configuration information is correct, type
y
and press
Enter
.
The DX-Series Setup Menu displays.
5
Select
6
to restart the DX-Series system.
The system reboots.
Creating Cartridges
2
To create cartridges on the storage array(s):
Caution:
Creating cartridges will destroy all data on existing
storage array cartridges.
1
Select
3
from the DX-Series Setup Menu to configure the user options.
2
The system warns you that creating cartridges will destroy any
existing cartridge data and prompts you to continue. Type
y
and the
system services are shut down.
The cartridge creation process asks you to make the following
selection:
• Type
1
to create cartridges on ALL storage arrays.
• Type
2
to create cartridges on a SPECIFIED storage array.
Caution:
If this is an upgrade to an existing system, create
cartridges ONLY on the new storage array.
• Type
3
to create cartridges on a specified RAID set.
• Type
4
to exit create cartridges.
Note:
All default values are shown in [ ].
