Chapter 3 DX-Series Remote Management
Configuration
Quantum DX-Series User’s Guide
49
Figure 29 Assigning a Library
Name
2
Enter a library name and click
Apply
.
The DX-Series system will use the new library name the next time the
system is rebooted.
Figure 30 Configuring the
Network
The network configuration information was entered during the initial
setup of the DX-Series system. Consult your network administrator prior
to changing any of the information.
Viewing/Editing Network Configuration
3
1
To access the
Network Configuration
page, from the
Configuration
page, click
Network
.
The management frame displays the
Network Configuration
page
(see
figure 31
).
Note:
The library name is independent of the host name in the
Network
tab (see
Configuring the Network
on page 49).
