Installing
Options
2-59
Setting Up Your Printer
Enabling/Disabling the Start-up Page
A start-up page automatically prints when you turn on your print sys-
tem. However, you can save time, paper, and toner by disabling the
start-up page.
If you need the information included on the start-up page after you
have disabled the page, then you must enable the start-up page and
turn the printer off and then on again.
Two ways to disable (or enable) the start-up page are
1
Use the printer control panel (Administration/Startup
Options/Do Start Page menu).
See “Enabling/Disabling the Start-up Page” in chapter 4, “Printer
Configuration,” of the
Reference
guide for complete information.
2
Use CrownAdmin to access either remote console or config-
uration buttons or use the local console port to access the
configuration menu.
Installing Options
All of the options for your printer are documented in the
Options
man-
ual included on the documentation CD-ROM. If you ordered a large-
capacity input feeder (LCIF) and/or a large capacity output stacker
(LCOS), see appendix C, “Installing Options,” in this manual for instal-
lation procedures.
What's Next?
Now that you’ve set up your printer, go to chapter 3, “Connecting to a
PC,” chapter 4, “Connecting to an Ethernet Network,” or chapter 5,
“Connecting to a Macintosh,” of this manual to connect your printer to
a host computer or a network.
v
