Introduction
QMS 4060 Print System Getting Started
5-2
Introduction
This chapter describes how to connect your printer to a Macintosh via
the Ethernet or LocalTalk port.
Connecting to a Macintosh
To connect to a Macintosh you must do the following:
1
Turn the power off on the printer.
2
Connect the printer to the Macintosh.
n
If your Macintosh has an Ethernet connection, connect the
printer to the Macintosh as described in chapter 4, “Connect-
ing to an Ethernet Network” and your Macintosh documenta-
tion.
In addition to the Ethernet interface, you have the option of
using one optional interface to connect your printer to a sec-
ond Ethernet network, a Token-Ring network, a single Macin-
tosh, or a LocalTalk network.
If you’ve purchased an optional interface for your printer, see
the
Options
manual as well as the documentation provided
with the interface for installation instructions.
n
If your Macintosh doesn’t have an Ethernet connection, you
need to order the optional LocalTalk interface card for this
printer. See chapter 3, “Optional Interfaces” of the
Options
manual for information on installing the interface card in the
printer and connecting the printer to a Macintosh.
3
Turn on both the printer and the Macintosh.
4
Install a printer driver.
See “Macintosh Printing Software” .
5
Now you’re ready to print.
