Loading the
Paper Trays
QMS 4060 Print System Getting Started
2-56
5
Replace the paper-size holders.
Load Paper in the Tray
1
Unwrap the paper and note which side the arrow points to.
»
Note:
Paper is packed in reams of 500 sheets. Do not unpack the
paper above the printer as this might cause particles to fall into
the printer components. Note the arrows on the wrapper. They
show print side of the paper.
2
Remove the top and bottom sheets.
The top and bottom sheets sometimes have residual glue buildup
that could cause the printer damage.
3
Place a stack of paper in the tray with the print side facing down.
The print side is usually indicated by an arrow on the paper wrapper.
▲
Caution:
If paper is not loaded with the print side down, the
paper may jam or have excessive curl.
LG L
LGL
