Network
Connection
4-5
Connecting to an Ethernet Network
Thin-Wire Ethernet Connection
Thin-wire Ethernet connections use BNC connectors.
▲
Caution:
Unless the BNC “T” connector is already installed on the
thin-wire Ethernet cable, your network’s operation is disrupted during
the connection process.
1
Turn off the printer, and unplug the power cord.
2
If the BNC “T” connector is already installed, go to step 3.
Otherwise, attach one section of thin-wire Ethernet cable to
one end of the BNC “T” connector.
3
Attach another section of thin-wire Ethernet cable or a
50 ohm terminator to the other end of the BNC “T” connec-
tor.
4
Attach the BNC “T” connector to the BNC port on the Crown-
Net interface.
5
Plug in the printer, and turn it on.
BNC 50 Ohm
Terminator
BNC T
Connector
