Custom Tray
C-53
Installing Options
6
Set up the tray media size tabs on the rear of the custom tray.
Use the following chart for reference or the label attached to
the paper tray.
7
Access the Operator Control/Custom Input Bins configura-
tion menu to select the paper size for the custom input bin.
Standard Paper Sizes
Your custom tray can also feed standard paper sizes. You must make
sure that your application paper size setup is the same as the paper
that is loaded in the custom tray. Follow the tab setting in this table to
set up the custom tray for standard media sizes.
Tray Tabs
Standard Media Size
Letter, Executive, A4, A5,
Statement
:Length 7.16” to 8.5” (182mm to 215.9mm)
- Tab is moved forward
- Tab is moved backward
:Width 3.93” to 11.69” (100mm to 297mm)
:Length 11.69” to 17” (297mm to 431.8mm)
:Width 3.93” to 11.69” (100mm to 297mm)
:Length 8.5” to 11.69” (215.9mm to 297mm)
:Width 3.93” to 11.69” (100mm to 297mm)
