Loading the
Paper Trays
QMS 4060 Print System Getting Started
2-52
cally pulls paper from the tray. Loading paper in the tray involves the
following steps:
n
Opening the tray
n
Setting the correct paper size for the tray (if necessary) and paper
size indicator
n
Loading paper in the tray
n
Closing the tray
»
Note:
Ensure that the tray size matches the paper size (for example,
letter paper must be loaded only when the tray is set to letter size).
Since the paper tray sends a paper size signal to the printer
controller, using a wrong size paper will cause jamming or the image
positioned incorrectly on the page.
Setting Up the Paper Size for a Paper Tray
»
Note:
All three paper trays are set up for letter-size printing from the
factory. If you need to configure the trays for any other paper size,
then follow this procedure. Otherwise, go ahead to the next section.
1
Open the tray that you wish to change paper size.
2
Locate the blue locking thumbscrews in the paper tray.
Locking
Thumbscrews
Paper Guides
