QMS 4060 Getting Started Download Page 110

Page: 110 / 206

Software

Installation

QMS 4060 Print System Getting Started

4-6

Twisted-Pair Ethernet Connection

Twisted-pair Ethernet connections use RJ45 connectors.

Turn off the printer, and unplug the power cord.

Connect one end of the twisted-pair Ethernet cable to the
RJ45 port on the CrownNet interface.

Connect the other end of the cable to the 10BaseT concen-
trator.

Plug in the printer, and turn it on.

Go to “Software Installation” on page 4-6.

Software Installation

Complete installation instructions for AIX, HP-UX, Macintosh, OS/2,
Sun/SPARC Solaris 2.4 and SunOS 4.1

, Windows 3.1, Windows 95,

Windows for Workgroups 3.11, and Windows NT 3.5 are included in
the

QMS CrownNet Setup

Guide

on the

QMS Software Utilities

CD-

ROM.

These instructions are also provided in readme files in the appropri-
ate directories on the CD-ROM.

Summary of Contents for 4060















































































































































































































Search results

Summary of Contents for 4060

Reviews:

Related manuals for 4060

Brands by name

Popular brands

QMS 4060, Getting Started

Search results

Summary of Contents for 4060

Reviews:

Related manuals for 4060

Brands by name

Popular brands