QMS 1060E, Operation

Page: 77 / 116

Emulation
Problems
6-17 Troubleshooting
Emulation Problems
PostScript Level 1
If you are using a Level 1 driver in your application and you have trouble
printing PostScript files, try printing the files with the PostScript level
set to Level 2 (Administration/Emulations/PostScript menu). See chap-
ter 4, “Printer Configuration,” of the
Reference guide for more informa-
tion.
Output Problems
600x600 dpi Printing Unavailable
If you’ve configured the printer from the control panel to print at
600x600 dpi resolution but the printer continues printing at 300x300
dpi (Administration/Engine/Def Resolution menu), you may need addi-
tional memory allocated to the frame buffer or you may need to add
additional RAM (SIMMs).
To allocate the correct amount of memory, use the Administration/
Memory/Frame Buffer menu. See chapter 4, “Printer Configuration,” in
the
Reference
for more information. To install additional RAM, see
chapter 6, “Printer Options,” in the
Reference
guide
.
Binary Data Printing Problem
If binary data is not being interpreted correctly or if your binary print job
doesn’t print, check that PS Protocol is set to the Binary or Binary Fixed
mode in the following menus:
n
Administration/Communications/Serial
n
Administration/Communications/Parallel
n
Administration/Communications/Network 2 menus