QMS 1060E, Operation

Page: 76 / 116

Printer Problem
Checklist
QMS 1060E Print System Operation 6-16
Control Panel Problems
Data Indicator Stays Lit
n
If you’re downloading additional typefaces, too many can over-
load the printer’s memory, causing the printer to reset and lose
information previously downloaded to RAM or to hard disk. Make
sure you have enough printer memory for the additional type-
faces. Additional memory (RAM) is available and easily installed.
Contact your QMS vendor for information on RAM upgrades
(SIMMs). See chapter 6, “Printer Options,” in
Reference guide for
installation instructions.
n
On the optional AppleTalk network, Macintosh computers some-
times interfere with each other. If this happens often, reinstall the
LaserWriter and Laser Prep files to reset the printer. If neither of
these files is the problem, contact your QMS vendor.
Paper Jam Message Stays On
n
If a
PAPER JAM
message displays in the control panel message
window, open the printer and clear the jam. If the message is still
there, try opening and closing the printer’s top cover again.
n
Is the toner cartridge installed in the printer? The printer does not
tell you that the toner is absent. It will power up, and either jam at
the Fuser, or print a blank page.
n
As a last resort, try turning the printer off and on (this causes jobs
to be lost).