Status
Messages
6-7
Troubleshooting
Clearing Output Tray Jams
If media has become jammed outside the upper unit at the output tray
area, clear the jam as follows:
1
Open the top cover.
2
Remove the jammed piece of paper, and close the main unit.
The printer resets itself and continues operation.
Status Messages
Status messages in the message window provide information about
your printer and help you locate many problems. When the condition
associated with a displayed message has changed, the message is
cleared from the window.
Status messages are not displayed while the printer is off line.
The following status messages may appear in the message window:
»
Note:
Shaded table cells indicate that the message scrolls.
x ACTIVE JOBS
Indicates that the printer is on line
and identifies the number of jobs in
process.
ADJUST
INPUTBIN BIN
Indicates that the displayed paper
cassette is not inserted correctly.
CANCELLING JOB
Indicates that the Cancel key has
been pressed, and that all jobs with a
printing, interpreting, or terminating
status in the print queue are being
canceled. Displays until the canceled
print job has been removed from the
queue. After the jobs are canceled,
the printer resumes printing other
jobs that are in the queue.
Summary of Contents for 1060E
